Please upgrade to the new Edge browser, or use Chrome, Firefox or Safari, before continuing. Internet Explorer will not support the best shopping experience on the ADI Digital Branch site after March 12.
ADI #:245087 Model #: 245087 Name: Call Fi750/Mcp Pull Stations/Manual
Operating instructions in the form of symbols
Activation by pressing in plastic pane without breaking it
Plastic pane easy to reset
Product Overview
General Information
The manual call point according to EN 54-11 / type A is accommodated in a red plastic housing and is designed for use on the loop with Labor Strauss protocol. The detector is activated by pressing in the plastic pane without breaking it. The pane can be placed again into the idle position with a special key, thereby resetting the detector.
A two-coloured LED indicates the activated condition of the detector in red, the fault condition in yellow and the loop polling in green. The integrated dual-isolator disconnects the loop at short circuit on the loop line.
By means of the Programming Unit FI750/PU, the address of the detector can be set in the range 1 to 240. In addition, the programming unit allows the reading-out of parameters, such as the default analogue value or the production date. Furthermore, in case of connection to a compatible fire detection control panel, the detector can also be AUTO-addressed.
Features
Operating instructions in the form of symbols (EN 54-11)
Activation by pressing in plastic pane without breaking it
Plastic pane easy to reset
Surface mounting box and special key included in delivery
Flush mounting with optional mounting frame on a 60mm installation box
Main Features
Operating instructions in the form of symbols
Activation by pressing in plastic pane without breaking it
